Lathe Accessories

Products

Footswitch FS Price $21.50 This attachment frees your hands for easy on/off operation. To be used for all machines with a maximum power consumption of 500 W. Ideal for both... Click here for more details Clamp for V-Block Machinist's Price $10.50 Clamp for V-Block Machinist's "General" Click here for more details Machinist's Clamp V-Block Set Price $34.50 Machinist's Clamp V-Block Set "General" Click here for more details Clamp V-Block Tool Makers Set Price $59.50 Clamp V-Block Tool Makers Precision  "General" Click here for more details Tap 5 Piece Set Price $59.85 Fitted to Drill Chuck #JG-53008. Spiral tap set (5 pcs.). Tap: M2, M3, M4, M5, M6. Click here for more details Dies 5 Piece Set Price $45.50 For Die Holders #JG-53582 (dia- 20mm) and #JG-53583 (dia- 25mm). Dies (dia 25mm): M2, M3, M4. Dies (dia- 25mm): M5, M6. Click here for more details Gear Cutter 6 Piece Set Price $228.50 Fitted to Cutter Arbor JG-53441. Gear module is 0.5 x 40mm. Teeth: 12-13 / 14-16 / 17-20 / 21-25 / 26-34 / 35-54 Click here for more details Metal Saw 3 Piece Set Price $36.50 Fitted to Cutter Arbor JG-53441. Size: Dia. 1.0, 1.5, 2.0mm (3 pcs.) Click here for more details Proxxon Lathe Accessories Price $77.50 These Proxxon Lathe Accessories meet high German quality standards. The five tools are made from quality cobalt HSS, preground. All tools packed in a ... Click here for more details Independent Four Jaw Chuck Price $38.50 Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 0 to 1 3/8" (0 to 35 mm) inside and 35/64" to 2 5/8" (14 to 67 mm... Click here for more details Die Holder - Dia. 25mm Price $19.50 For male screw production with dies (Dia. 25mm). Guide shank clamped withDrill Chuck JG-53008. Click here for more details Die Holder - Dia. 20mm Price $18.50 For male screw production with dies (Dia. 20mm). Guide shank clamped withDrill Chuck JG-53008. Click here for more details 4-Way Tool Post (ML-360) Price $84.50 For more efficient operation with the Yasui ML-360 Lathe (JF-535). # 3580 Click here for more details LATHE Toolbit Sheams Price $7.50 LATHE Toolbit Sheams pack for Adjusting Height Center Click here for more details Oil Pan 360 Price $128.00 Street oil pan to accommodate ML-360 Mini-Lathe unit (JG-535) body securely, which also increases stability. Click here for more details X-Y Table for Milling Attachment MA-360 (JG-53699) Price $630.00 To use as vertical milling machine with Milling Attachment MA-360 (JG-53699). Click here for more details Milling Vice Price $94.85 Mounted on carriage directly or through Milling Table (JG-53534). Jaws: 60 (W) x 20 (H)mm, opening 46mm. # 3542 Click here for more details Milling Table Price $87.50 Mounted on carriage where workpiece is fixed on 3 T-slots with Fixture JG-53443 (ML-360). Milling table measures 160mm x 40mm x 190mm (6.29"... Click here for more details Fine Feed Attachment for MA-360 Manix Price $78.50 Fitted to Milling attachment MA-360. Fine feed practicable by turning handwheel. Minimum increment 0.025mm. Click here for more details Drill Chuck - Dia. 10mm Price $94.50  Fitted to Milling Attachment MA-360 (JG-53699) to clamp drill up to Dia. 10mm. Click here for more details Milling Collet Price $128.50 Fitted to Milling Machines. Size: Dia. 6, 8, 10, and 12mm. Click here for more details Manix Lathe Handwheel Price $19.85 This Manix Lathe Handwheel is an inch version handwheel for the Manix ML-360 (JF-535). # 353-0120 Click here for more details Manix Lathe Dial Price $18.50 This Manix Lathe Dial is a cone shaped dial that is the inch calibrated version for the Manix ML-360 (JF-535). # 353-109 Click here for more details T-Slot Face Plate - Dia. 150mm Price $94.50 For lathing and milling of large or irregular shape out of chuck capacity. Supplied with Fixture JG-53443. Click here for more details Travelling Rest Price $45.50 To keep long and thin workpiece fixed. Capacity:  50mm. Click here for more details Fixed Rest Price $46.85 To support workpiece when tail center not applicable. Capacity: ? 50mm. Click here for more details Slow Speed Attachment Price $148.50 To lower main spindle speed to 70, 150rpm / 50Hz or 80, 170rpm / 60Hz. Effective in threading or turning on hard workpiece. Click here for more details Taper Turning Attachment Price $115.00 Scale: 45 degrees on both sides. Tool post travel: 52mm Click here for more details Automatic Feed & Thread Cutting Attachment Price $172.50 To provide automatic longitudinal feed 0.07 and 0.014. With gearschanged, also practicable the following thread cutting. # 3511MM: 0.2, 0.25, 0.3, 0.3... Click here for more details Collet Chuck 9 Piece Set Price $368.50 Comes with diameter sizes of 2, 3, 4, 5, 6, 8, 10, 12, and 14mm. Used with (JG-53509) Collet Holder. # 3510 Click here for more details Collet Holder Price $85.00 Used with Collet No. 3510 (JG-53510) for precise diameter. # 3509 Click here for more details Drill Chuck - Dia. 10mm Price $98.50 To hold drill up to Dia. 10mm with arbor MT#2. Click here for more details Live Center Price $39.85 No friction with 2 ball-bearings built in. Click here for more details Dead Center Price $12.00 For both main and tail spindle. End taper is 60. Shank MT#2. Click here for more details Chuck Mounting Adaptor Price $55.00 To fit chucks JG-53501, JG-53501-2, and JG-53502.Collet chuck JG-53509 and T-Slot Face Plate JG-53523. Click here for more details 4-Jaw Independent Chuck Price $335.00 With hardened and individually adjustable jaws. Capacity is 25mm / 75mm (with jaws reversed). Click here for more details 3-Jaw Universal Chuck (Hardened Jaws) Price $315.00 Self-centering scroll chuck with hardened jaws. Capacity is 25mm / 75mm (with jaws reversed). # 3501 Click here for more details 4-Way Tool Post (ML-210) Price $68.50 Tool post capable of 4 squared bits for the Yasui ML-210 Lathe (JF-521). # 3480 Click here for more details Oil Pan 210 Price $84.50 Street oil pan to accommodate ML-210 Mini-Lathe unit (JG-521) body securely, which also increases stability. Click here for more details Circular Dividing Table Price $255.00 Genuine dividing table with worm gear andindex plate, capable of up to 360 division. Click here for more details Insert Tips for Bit Holder JG-53452 Price $22.85 This 2 piece tip set is used to hold JG-53452 Bit Holder. Click here for more details Bit Holder (SMGHR-0808F-RS) Price $56.85 For external threading tool. # 3451-2 Click here for more details Diamond Insert Tip for JG-53451 Price $88.50 Used to hold #JG-53451 Bit Holder. Click here for more details Insert Tips for Bit Holder JG-53451 Price $18.50 This 3 piece tip set is used to hold JG-53451 Bit Holder. Click here for more details Bit Holder (SDNCN0808-D07) Price $36.50 For sharp pointed tool. # 3451-1 Click here for more details Insert Tips for Bit Holder JG-53450 Price $16.50 This 3 piece tip set is used to hold JG-53450 Bit Holder. # 3450-2 Click here for more details Bit Holder (SCLCR0808-D06) Price $36.50 For right hand finishing tool. # 3450-1 Click here for more details Fly Cutter Price $87.50 For surface milling, boring, and so on. Fitted with Milling Collet JG-53432. Shank: Dia. 10mm. Supplied with cutting tool. # 3445 Click here for more details Fixture Price $28.00 To fix workpiece on T-slot of Milling Table (JG-53434) ML-210. Milling table measures 60mm x 55mm x 105mm (2.36" x 2.16" x 4.13") and has slots for 6m... Click here for more details Milling Vice Price $72.50 Mounted on carriage directly or through Milling Table (JG-53434). Jaws: 44 (W) x 15 (H)mm, opening 35mm. Click here for more details

[ 1 ] 2 Next View All