|
F.D. Long Knife File - Cut #1
Friedrich Dick Long Knife File with a Cut #1 has teeth on three sides. Tapers in width, wider edge is smooth, and that edge lets you file prongs without...
|
|
|
F.D. Long Knife File - Cut #2
Friedrich Dick Long Knife File with a Cut #2 has teeth on three sides. Tapers in width, wider edge is smooth, and that edge lets you file prongs without...
|
|
|
F.D. Long Knife File - Cut #3
Friedrich Dick Long Knife File with a Cut #3 has teeth on three sides. Tapers in width, wider edge is smooth, and that edge lets you file prongs without...
|
|
F.D. Long Barrette File - Cut #0
Friedrich Dick Long Barrette File with a Cut #0 has teeth on the flat side only. Tapered file for all-purpose filling, smooth backprevents...
|
|
|
F.D. Long Barrette File - Cut #1
Friedrich Dick Long Barrette File with a Cut #1 has teeth on the flat side only. Tapered file for all-purpose filling, smooth backprevents...
|
|
|
F.D. Long Barrette File - Cut #2
Friedrich Dick Long Barrette File with a Cut #2 has teeth on the flat side only. Tapered file for all-purpose filling, smooth backprevents...
|
|
|
F.D. Long Barrette File - Cut #3
Friedrich Dick Long Barrette File with a Cut #3 has teeth on the flat side only. Tapered file for all-purpose filling, smooth backprevents...
|
|
F.D. 3 Square File - Cut #0
Friedrich Dick Three Square File with a Cut #0 has teeth on three sides. Small, tapered for creases in metal, corners, edges, and sharp...
|
|
|
F.D. 3 Square File - Cut #1
Friedrich Dick Three Square File with a Cut #1 has teeth on three sides. Small, tapered for creases in metal, corners, edges, and sharp...
|
|
|
F.D. 3 Square File - Cut #2
Friedrich Dick Three Square File with a Cut #2 has teeth on three sides. Small, tapered for creases in metal, corners, edges, and sharp...
|
|
|
F.D. 3 Square File - Cut #3
Friedrich Dick Three Square File with a Cut #3 has teeth on three sides. Small, tapered for creases in metal, corners, edges, and sharp...
|
|
F.D. Long Square File - Cut #0
Friedrich Dick Long Square File with a Cut #0 has teeth on all four sides. It is a small file for filling flat, straight angles. Overall...
|
|
|
F.D. Long Square File - Cut #1
Friedrich Dick Long Square File with a Cut #1 has teeth on all four sides. It is a small file for filling flat, straight angles. Overall...
|
|
|
F.D. Long Square File - Cut #2
Friedrich Dick Long Square File with a Cut #2 has teeth on all four sides. It is a small file for filling flat, straight angles. Overall...
|
|
Friedrich Dick Square File - Cut #3
Friedrich Dick Square File with a Cut #3 has teeth on all four sides. It is a small file for filling flat, straight angles. Overall...
|
|
F.D. Long Round File - Cut #0
Friedrich Dick Long Round File with a Cut #0 has teeth all around. Tapered file used for cleaning out small concave curved surfaces, enlarging...
|
|
|
F.D. Long Round File - Cut #1
Friedrich Dick Long Round File with a Cut #1 has teeth all around. Tapered file used for cleaning out small concave curved surfaces, enlarging...
|
|
|
F.D. Long Round File - Cut #2
Friedrich Dick Long Round File with a Cut #2 has teeth all around. Tapered file used for cleaning out small concave curved surfaces, enlarging...
|
|
|
F.D. Long Round File - Cut #3
Friedrich Dick Long Round File with a Cut #3 has teeth all around. Tapered file used for cleaning out small concave curved surfaces, enlarging...
|
|
F.D. Long Crossing File - Cut #0
Friedrich Dick Long Crossing File with a Cut #0 has teeth on both sides. Tapered file with low domed half roung areas for filing curved surfaces. Overall...
|
|
Back
1
|
2
|
[3]
|
4
|
5
|
6
|
7
|
8
|
9
Next
|
