For a replacemt Vacuum Pump (CD-9740) 110V & (CD-9740-220) 220V

Yasui's most advanced wax injection system is now available with the new Digital Vacuum Wax Injector (D-VWI) combined with the new Advanced Auto Clamp (AAC). Yasui has updated and improved their proven system for even better results. By using the two-step pressure injection feature (patent pending) was shrinkage is virtually eliminated while assuring consistent wax weight. The redesigned clamp has been greatly improved with its "Lateral Flexibility Mechanism" and smooth forward and clamping movement. The AAC's newly designed controller allows the user to easily store up to 10,000 memory settings. Each digit, (six total) represent settings for the following
?
1. Initial injection pressure
2. Second injection pressure
3. Timing start for second injection pressure
4. Clamp pressure
5. Forward pressure
6. Clamp holding time after injection

Additional features include:?
- Wax level % display
- Independent accurate temperature control for wax tank & nozzle
- Start switch on clamp and clamp controller for operator ease
- Diagnostic alarms and injection counter

Digital Vacuum Wax Injector Specifications:
Power Supply: 115V or 230V model, 50/60Hz, Single Phase

Power Consumption: 450VA (max.)

Compressed Air Supply: 0.40 - 0.70 MPa

Temperature Display Range: 40 Degrees - 99.9 Degrees Celsius (103 Degrees - 210 Degrees Ferinheight)

Temperature Set Range: 40 Degrees - 90 Degrees Celsius (103 Degrees - 193 Degrees Ferinheight)

VAC Time Net Range: 0 - 9.99 / 0 - 99.9 sec.

INJ Time Set Range: 0 - 99.9 / 0 - 600 sec.
(ACC control panel is 0 - 99.9 sec.)

Melting Pot Temperature: 0 - 99 hours

Wax Capacity: Approx. 3Kg

Nozzel Temperature Accuracy: + / - 0.2 Degrees Celsius

Dimensions: 450mm W x 285mm D x 450mm H

Weight: Approx. 15.5 Kg


Advance Auto Clamp Specifications:
Power Supply: AC100 - 240V, 50/60Hz, Single phase

Power Consumption: 50W (max.)

Compressed Air Supply: 0.25 - 0.30 MPa

Pressure Sensor Display Range: -5 through 240 kPa


- Set Range -
- Press 1 (Primary Pressurization): 10 - 220 kPa
- Press 2 (Secondary Pressurization): 10 - 220 kPa
- TIME of Starting Press: 2 0 - 99.9 Sec.
- Mold CLAMP: 30 - 235 kPa
- Mold FORWARD: 65 - 235 kPa
- Mold HOLD Time: 0 - 300 Sec.

Dimensions: Clamp Unit 157mm W x 223 mm H
Dimensions: Only extends 150mm from injector front

Controller Box: 160mm W x 260mm D x 145mm H

Weight: Approx. 5 Kg

Controller Box: Approx. 3 Kg