|
The headstock swivels through 360?, which is indicated on a scale. 6 spindle speeds from 140 to 2,470/min are achieved by means of pulleys and a Poly-V belt. Quill accepts collets 6, 8, 10 and 12 mm (included). Headstock with scale, tilts and locks in position (1 revolution = 1.5 mm). Large machined steel crosstable with 3 T-slots. NO 24 30
Technical Data:
220 - 240 V. 400 W. 50/60 Hz. Spindle speeds of 140, 310, 480, 730, 1,140 und 2,470/min. Column diameter 45 x 500 mm. Machined steel table 400 x 125 mm. X-Y travel is 225 mm x 80 mm respectively. 370 x 350 x 600. Weight approx. 40 kg.
Specifications:
1. Strong, quiet, high quality capacitor motor (400 W).
2. Handwheel for height adjustment.
3. Headstock swivels (with scale). Lockable quill with 30 mm travel.
4. Quill accepts precision collets (one each of 6, 8, 10 und 12 mm included).
5. Machined steel table (400 x 125 mm) with 3 T-nuts.
6. Large handwheel and dial with moveable scales. One revolution = 2.0 mm. One coarse division = 0.1 mm, one fine division = 0.02 mm.
7. Switch for CW or CCW rotation.
8. Poly-V belt for 6 spindle speeds from 140 to 2,470/min.
Important:
Both the headstock and spindle can be locked in position when milling.
|
