|
Features of Advanced Auto Clamp AAC
- Just place a mold on the clamp unit of the AAC, input digits, and press the START button, then the workcycle (clamp, forward the mold to the nozzle, receive wax, hold it until wax gets hard, and unclamp) will be done automatically.
- The rubber mold is always aligned with the injection nozzle of the wax injector by the 'Lateral Flexibility Mechanism' of the AAC.
- 10 different parameters of PRESS 1, PRESS 2, TIME of starting press 2, CLAMP, FORWARD, HOLD time can be stored. From 10,000 combinations of wax shooting, you can choose the optimum combination easily.
Specifications:
Power Supply: AC100 - 240V, 50/60Hz, Single phase
Power Consumption: 50W (max.)
Compressed Air Supply: 0.25 - 0.30 MPa
Pressure Sensor Display Range: -5 (+ or -) 240 kPa
Set Range:
Press 1 (Primary Pressurization): 10 - 220 kPa
Press 2 (Secondary Pressurization): 10 - 220 kPa
TIME of Starting Press: 2 0 - 99.9 Sec.
Mold CLAMP: 30 - 235 kPa
Mold FORWARD: 65 - 235 kPa
Mold HOLD Time: 0 - 300 Sec.
Dimensions: Clamp Unit 157mm W x 223 mm H
Dimensions: Only extends 150mm from injector front
Controller Box: 160mm (W) x 260mm (D) x 145mm (H)
Weight: Approx. 5 Kg
Controller Box: Approx. 3 Kg
|
